Portal
Suchergebnisse
Results list
Greenland Climate Network (GC-Net) Data
In Memory of Dr. Konrad (Koni) Steffen <br /> <br /> Update October 2022: The GC-Net is kindly continued by the Geological Survey of Denmark and Greenland (GEUS). Starting October 3, 2022, the access to the latest versions of the "ready to use" L1 data has been migrated to GEUS. Future data versions will be available at: [https://doi.org/10.22008/FK2/VVXGUT](https://doi.org/10.22008/FK2/VVXGUT) Background Starting with a single station in 1991, the Greenland Climate Network (commonly known as GC-Net) is a set of Automatic Weather Stations (AWS) set up and managed by the late Prof. Dr. Konrad (Koni) Steffen, and spanning the Greenland Ice Sheet (GrIS). This first station was "Swiss Camp" or the "ETH-CU" camp (GC-Net station 01) which was used as a field science and education site by Koni for years. The GC-Net was expanded with multiple NASA, NOAA, and NSF grants throughout the years, and then supported by WSL in the later years. These data (see "C-file" below) were previously hosted by the Cooperative Institute for Research in Environmental Sciences (CIRES) in Boulder, Colorado. Overview Provided in this dataset are the 16 longest running stations in the network, which are spread over a significant area of the GrIS and the majority of the unique climatic zones. From the South Dome high point in the South, to the Western Jakobshavn ablation region in the west, to the Petermann glacier in the North across east of the Northeast Greenland Ice Stream to the east, GC-Net is the longest running climatological record of Greenland. The standard GC-Net station consists of: * Air temperature measurements at 2 heights above the surface * Temperature and humidity measurements at 2 heights above the surface * Wind speed and direction measured at 2 heights above the surface * Sonic distance sounder measurements for 2 snow height and distance of instruments to surface * Incoming shortwave radiation measurement * Reflected shortwave radiation measurement * Net broadband radiation (long- and short-wave) measurement * Air pressure measurement Data have often been repatriated in near-real time using one of either the GOES geostationary satellite or the ARGOS polar orbiting satellite transmission system. The stations were visited typically every 1-2 years for maintenance and service, and to download full uncorrupted data directly from the dataloggers. GC-Net stations were visited by Twin Otter equipped with snow skids to land directly on the open-ice at the AWS locations, or by helicopter near the west coast. The AWSs operate on solar and battery power and occasionally lost power during the dark and cold winter months, particularly when the batteries were aging. Dataset This dataset consists of 2 main data levels; Level 0 and Level 1. Level 0 is the raw data from the dataloggers, historical processing codes, satellite transmissions, and Koni’s personal data archive. Level 0 data (.zip) directories contain subdirectories: * “C file” - contains the historical processed datafile for each station. * “Campbell logger files” - contains the raw csv datafiles from the stations’ Campbell Scientific dataloggers since the CR1000 era (~2007-2008 for most stations). * “Photos” - contains photographs of the station when available marked by year. Level 1 is the appended, calibrated, cleaned, and quality flagged data. The full processing scheme is open-source and publicly available on the following GitHub repository (please also check GitHub for the latest L1 data): [GC-Net L1 data on GitHub](https://github.com/GEUS-Glaciology-and-Climate/GC-Net-level-1-data-processing "GC-Net-level-1-data-processing") Level 1 data is provided in the newly described csv-compatible [NEAD format](https://www.envidat.ch/#/metadata/nead "NEAD format"). <br /> Additional Details Dataset description publication will be forthcoming. The Geological Survey of Denmark and Greenland (GEUS) has been imperative in the reprocessing and continuity mission of GC-Net. Multiple GC-Net stations have been replaced with updated and upgraded AWS hardware at the same coordinates by GEUS. This effort will ensure continuity of the GC-Net dataset into the future.
Field observations of snow instabilities
This data set includes 589 snow profile observations including a rutschblock test, observations of signs of instability and an assessment of the local avalanche danger level, mainly recorded in the region of Davos (eastern Swiss Alps) during the winter seasons 2001-2002 to 2018-2019. These data were analyzed and results published by Schweizer et al. (2021). They characterized the avalanche danger levels based on signs of instability (whumpfs, shooting cracks, recent avalanches), snow stability class and new snow height. The data are provided in a csv file (589 records); the variables are described in the corresponding read-me file. These data are the basis of the following publication: Schweizer, J., Mitterer, C., Reuter, B., and Techel, F.: Avalanche danger level characteristics from field observations of snow instability, Cryosphere, 15, 3293-3315, https://doi.org/10.5194/tc-15-3293-2021, 2021. Acknowlegements Many of the data were recorded by SLF observers and staff members, among those Roland Meister, Stephan Harvey, Lukas Dürr, Marcia Phillips, Christine Pielmeier and Thomas Stucki. Their contribution is gratefully acknowledged.
Seilaplan Tutorial: Merge DTM tiles
In order to use the QGIS plugin ‘Seilaplan’ for digital cable line planning, a digital terrain model (DTM) is required. In this tutorial video, we show how to merge multiple DTM raster tiles into one file, using the QGIS tool ‘Virtual Raster’. This simplifies the digital planning of a cable line using the QGIS plugin ‘Seilaplan’. Please note that the tutorial language is German! Link to Seilaplan website: https://seilaplan.wsl.ch *************************** Für die Verwendung des QGIS Plugins Seilaplan zur digitalen Seillinienplanung ist ein digitales Höhenmodell (DHM) nötig. In diesem Tutorialvideo zeigen wir, wie man mit dem QGIS-Plugin Virtuelles Raster mehrere DHM-Kacheln zu einem einzigen Rasterfile zusammenfügen und abspeichern kann. Für die Seillinienplanung mit Seilaplan muss nun nur noch eine Datei, mein neues virtuelles Raster, ausgewählt werden. Link zur Seilaplan-Website: https://seilaplan.wsl.ch
Modeling snow saltation: the effect of grain size and interparticle cohesion
This dataset includes the parallel application and the main results supporting the research article "Modeling snow saltation: the effect of grain size and interparticle cohesion" published at the Journal of Geophysical Research: Atmospheres. The code is a flow solver based on the Large Eddy Simulation (LES) technique coupled with a Lagrangian Stochastic Model (LSM). The interaction of snow particles with the bed is modeled with statistical and physically-based models for aerodynamic entrainment, rebound and splash, following the works of Groot Zwaaftink et al. (2014), Comola and Lehning (2017) and Sharma et al. (2018). This algorithm was also used by Sigmund et al. (2021) to model snow sublimation.
Four years of daily stable water isotope data in stream water and precipitation from three Swiss catchments
This dataset contains four years of daily measurements of the natural isotopic composition (2H, 18O) of precipitation and stream water at the Alp catchment (area 47 km2) in Central Switzerland and two of its tributaries (0.73 km2 and 1.55 km2). In addition, the dataset contains daily measurements of key hydrometeorological variables.
High resolution climate data for Europe
High-resolution information on climatic conditions is essential to many applications in environmental and ecological sciences. Here we present downscaled climate data for the CORDEX EUR11 domain at a high resolution of 30 arc sec. The temperature algorithm is based on statistical downscaling of atmospheric temperature lapse rates. The precipitation algorithm incorporates orographic predictors including wind fields, valley exposition, and boundary layer height. The resulting data consist of a daily temperature and precipitation timeseries. The data is distributed under a: Creative Commons: Attribution 4.0 International (CC BY 4.0) license.
ATLFISHREF A 12S mitochondrial reference dataset for metabarcoding Atlantic Fishes frequently caught during scientific surveys in the Bay of Biscay
The global biodiversity crisis driven by anthropogenic pressures significantly threatens marine ecosystems functioning. The rate of climate change and the impacts of anthropogenic pressures outpacing the capabilities of our observation tools, stresses the need to develop new methods to assess these rapid modifications. Environmental DNA (eDNA; DNA traces released by organisms) metabarcoding has emerged as a non-invasive method that has been widely developed over the last decade. Thanks to a large spatio-temporal coverage, high detection of rare species and its time and cost effectiveness, eDNA metabarcoding represents a promising biomonitoring tool. However, capturing fish diversity using eDNA requires a high-quality genetic reference database, which we are currently still lacking. For the South European Atlantic shelf area, we estimated that only 41% of the fish species present were recorded in the available eDNA reference databases. Improving reference databases can notably rely on opportunistic sampling enabling the reporting of sequences for new species. Therefore, the data provided here consists of barcoding 95 species of ray-finned and cartilaginous fishes over the 12S mitochondrial DNA gene. We generated 168 12S barcodes from fishes that were sampled in the Bay of Biscay (Northeast Atlantic, France) between 2017 and 2019. We also provided the “Teleo” barcode associated with a specific 12S region for each individual. In addition to the sequences, we provided for each individual the taxonomy, the details associated with the barcode (Genbank accession number, chromatograms), a photograph, as well as 5 ecomorphological measures and 11 life-history traits. These traits document several functions such as dispersion, diet, habitat use, and position in the food web. Furthermore, we provided the metadata of each sampling site (date, station, sampling hour, gear, latitude, longitude, depth) and environmental variables measured in situ (conductivity, salinity, water temperature, water density, air temperature). This data set is highly valuable to improve the Northeast Atlantic eDNA genetic database, thus helping to better understand the effects of environmental forcing in the Bay of Biscay, a transition zone housing mixed assemblages of boreal, temperate and subtropical fish species susceptible to display variability in functional traits to adapt to changing conditions.
Vordemwald, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1996 onwards
High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for two meteorological stations in Vordemwald in Switzerland where one station is located within a natural mixed forest stand (VOB) with European silver fir (_Abies alba_; 110 yrs) and oak trees (_Quercus sp._; 190-210 yrs) as dominant tree species. A second station is situated in the very vicinity outside of the forest (field station, VOF). The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Vordemwald is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the Swiss Federal Research Institute WSL.
High resolution monthly precipitation and temperature timeseries for the period 2006-2100
Predicting future climatic conditions at high spatial resolution is essential for many applications in science. Here we present data for monthly time series of precipitation and minimum and maximum temperature for four downscaled global circulation models. We used model output statistics in combination with mechanistic downscaling (the CHELSA algorithm) to calculate mean monthly maximum and minimum temperatures, as well as monthly precipitation sums at ~5km spatial resolution globally for the years 1850-2100. We validated the performance of the downscaling algorithm by comparing model output with observed climates for the years 1950-2069. CHELSA_cmip5_ts is licensed under a Creative Commons Attribution 2.0 Generic (CC BY 2.0) license.
LABES 2 Indicators of the Swiss Landscape Monitoring Program
The Swiss Landscape Monitoring Program (LABES) records both the physical and the perceived quality of the landscape with about 30 indicators. The surveys of the physical aspects are largely based on evaluations of data available throughout Switzerland from swisstopo and the Federal Statistical Office (FSO). Another significant part of the data comes from a nationwide population survey on landscape perception. This dataset describes data that have been assembled in the 2020 update of the Swiss Landscape Monitoring Program LABES.